Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway Sip 125
Part: Engine oil

To replace the engine oil of a Keeway Sip 125 scooter, start by placing the scooter on a flat surface. Then, lift the scooter using the center stand. Remove the oil filler cap. This will allow air to enter the system and facilitate the draining of the oil. Place a container under the drain plug and unscrew the plug using a wrench. Once the drain plug is removed, allow the used oil to drain completely into the container. Then, screw the drain plug back on, fill the engine with new oil, check the level, and start the scooter to evenly distribute the oil. At this point, you have completed the replacement of the engine oil of your Keeway Sip 125.

Posted on 24 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Keeway Sip 125
How to Change the Engine Oil on a Keeway Sip 125
Sip 125 To change the engine oil on a Keeway Sip 125, loosen the bolt securing the drain plug located at the bottom centre of the bike. Once removed, you can…
How do you replace the engine oil of the Keeway Sip 125?
How do you replace the engine oil of the Keeway Sip 125?
Sip 125 To replace the engine oil of the Keeway Sip 125, you will need to loosen the drain plug of the oil sump, which is located in the central lower part o…
How do you replace the oil of the Keeway Sip 125 gearbox?
How do you replace the oil of the Keeway Sip 125 gearbox?
Sip 125 In order to replace the gearbox oil of the Keeway Sip 125, you need to loosen the drain plug located on the rear right side of the transmission casin…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos