Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway Sip 125
Part: Brake pads

In this tutorial, you will see how to replace the front brake pads on the Keeway SIP 125 scooter, a very simple and quick operation. First, position yourself in front of the brake in question, then loosen the two indicated pins using an Allen key. Next, unscrew the two fixing bolts of the caliper using a 15mm socket, separate it from the fork, and remove the old pads. At this point, simply clean any dirt residue present, insert the new parts, and reassemble everything by following the reverse procedure.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Keeway Sip 125?
How to Replace the Front Brake Pads on a Keeway Sip 125?
Sip 125 To replace the front brake pads on a Keeway Sip 125, loosen the screws that secure the brake caliper pins to the corresponding disc. Once these screw…
How to change the engine oil of a Keeway Sip 125?
How to change the engine oil of a Keeway Sip 125?
Sip 125 To replace the engine oil of a Keeway Sip 125 scooter, start by placing the scooter on a flat surface. Then, lift the scooter using the center stand.…
How to Change the Transmission Oil on a SYM Sip 125 Scooter
How to Change the Transmission Oil on a SYM Sip 125 Scooter
Sip 125 As shown in this tutorial, changing the transmission oil on the SYM Sip 125 scooter is an extremely simple and quick operation. Before proceeding, en…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos