Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway Sip 125
Part: Air filter

To replace the air filter on the Keeway Sip 125, you need to loosen the screws that secure the filter box, located near the rear wheel. Once the screws holding the panel are loosened, you can remove it and slide out the air filter inside. This can now be replaced with a new spare part; once the new one is inserted, you can cover everything with the corresponding panel. At this point, you can start the engine and check that everything is working.

Posted on 18 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Keeway Sip 125?
Sip 125 To replace the air filter on a Keeway Sip 125, loosen the screws that secure the cover located at the rear of the bike, just above the rear wheel and…
How do you replace the air filter of the Keeway Sip 125?
How do you replace the air filter of the Keeway Sip 125?
Sip 125 The operation of replacing the air filter on the Keeway Sip 125 is carried out by loosening the screws that secure the casing located at the rear of …
How to change the engine oil of a Keeway Sip 125?
How to change the engine oil of a Keeway Sip 125?
Sip 125 To replace the engine oil of a Keeway Sip 125 scooter, start by placing the scooter on a flat surface. Then, lift the scooter using the center stand.…

How to Replace the Throttle Valve on the GasGas EC 300?

To replace the throttle valve on the GasGas EC 300, remove the entire throttle body from its housing. This is connected between the cylinder and the intake manifold. Once the throttle body is removed by loosening the screws and disconnecting all connectors, proceed to detach the connectors attached to it. Then, the valve can be removed from inside the throttle body and the new one can be inserted. Finally, reassemble everything and check its operation.

Watch the video!


by ScegliAuto

More videos