|
Do it yourself
| |||
| ||||
Model: Keeway Sip 125
To replace the front brake pads on a Keeway Sip 125, loosen the screws that secure the brake caliper pins to the corresponding disc. Once these screws are removed, detach the caliper from the disc so that the pads inside can be removed. After removing the old pads, insert the new ones, repositioning the caliper onto the disc; this will also allow you to secure it in place to ensure everything is functioning correctly.
Updated on 19 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Sip 125
In this tutorial, you will see how to replace the front brake pads on the Keeway SIP 125 scooter, a very simple and quick operation. First, position …
Sip 125
To replace the engine oil of the Keeway Sip 125, you will need to loosen the drain plug of the oil sump, which is located in the central lower part o…
Sip 125
To replace the air filter on the Keeway Sip 125, you need to loosen the screws that secure the filter box, located near the rear wheel. Once the scre…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.405
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
