Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on the Royal Enfield Himalayan

Model: Enfield Himalayan
Part: Battery

Video tutorial

These short and simple steps will show you how to remove and replace the battery on the Royal Enfield Himalayan, as well as on other models from the manufacturer. First, place the bike on its stand and start by removing the rider's seat.

Then, disconnect both battery terminals (positive and negative) and remove the battery from its compartment, as shown in the video. Next, install the new battery of the correct type and with the same amperage; connect it electrically and finally check the engine start, reassembling the rider's seat correctly!


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on the Royal Enfield Himalayan?
How to Replace the Battery on the Royal Enfield Himalayan?
Himalayan To replace the battery on the Royal Enfield Himalayan, loosen the bolts securing the cover located on the right side of the bike, just below the seat…
How to Change the Battery of a Royal Enfield Himalayan
How to Change the Battery of a Royal Enfield Himalayan
Himalayan In this brief and simple guide, you will learn how to remove and replace the battery of the Royal Enfield Himalayan motorcycle by following the instr…
How to Replace the Battery in the Royal Enfield Himalayan 411?
How to Replace the Battery in the Royal Enfield Himalayan 411?
Himalayan In this tutorial, you will see how to replace the battery in the Royal Enfield Himalayan 411, an extremely simple and quick operation. First, ensure …

How to Replace the USB Socket on the Benelli TRK 502?

To replace the USB socket on the Benelli TRK 502, loosen the screws securing the left side panel of the motorcycle, located just below the handlebars: once this panel is freed, you can remove it and locate the USB socket connector. By disconnecting this connector, you can pull the socket out of its housing: then connect the new socket to the connector, inserting it into its housing. After installation, check that the socket works by reinstalling the panel.

Watch the video!


by ScegliAuto

More videos