Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Throttle Cable on a KTM Duke 200

Model: Ktm Duke 200
Part: Accelerator

Video tutorial

To replace the throttle cable on a KTM Duke 200, loosen all the screws that secure the fuel tank laterally and at the front and rear. Once the tank is free, you can completely remove it, disconnecting any underlying hoses and connectors.

Next, loosen the nuts securing the throttle cable to the corresponding grip and the throttle body; this will allow the old cable to be pulled out and replaced with a new spare part. After replacement, reassemble all the components that were removed.


Updated on 15 August 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Lever on a KTM Duke 200
How to Replace the Gear Lever on a KTM Duke 200
Duke 200 To replace the gear lever on a KTM Duke 200, locate it on the right side of the bike, near the footpeg at the lower central part. To remove it, loose…
How to Replace the Clutch on a KTM Duke 200?
How to Replace the Clutch on a KTM Duke 200?
Duke 200 To replace the clutch on the KTM Duke 200, loosen the screws securing the specific cover located on the right side of the bike, at the lower centre. …
How to Replace the Headlight Bulb on a KTM Duke 200
How to Replace the Headlight Bulb on a KTM Duke 200
Duke 200 In this guide, find the main instructions to remove and replace the dipped beam bulb of the front headlight on a KTM Duke 200. First, place the motor…

How to Replace the Wing Mirror on a Harley Davidson Sportster

To replace the wing mirror on a Harley Davidson Sportster, loosen the nut located at the base of the mirror, at the bottom of the handlebars. Once this nut is fully loosened, you can slide out the pin that secures the mirror to the handlebars, completely removing the old mirror from its housing and replacing it with a new replacement part. The new mirror should be positioned, inserting the corresponding pin, and finally secured by tightening the nut at the bottom of the handlebars.

Watch the video!


by ScegliAuto

More videos