Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a KTM Duke 200

Model: Ktm Duke 200
Part: Headlight bulb

Video tutorial

In this guide, find the main instructions to remove and replace the dipped beam bulb of the front headlight on a KTM Duke 200. First, place the motorcycle on a stand and start unscrewing the rear screws of the front headlight to lower it. This will give you access to the interior; remove the protective cap and disconnect the electrical connector of the light.

Now, remove and replace the bulb with a new one of the correct type and fitting; check its proper functioning and reassemble the headlight unit.


Posted on 7 April 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlamp Bulb on a KTM Duke 200
Replacing the Front Headlamp Bulb on a KTM Duke 200
Duke 200 In today's video, you will learn how to remove and replace the front headlamp bulb on a KTM Duke 200. First, remove the side screws located near the …
How to Replace the Front Headlight Bulb on the KTM Duke 200
How to Replace the Front Headlight Bulb on the KTM Duke 200
Duke 200 In this tutorial, see how to replace the front headlight bulb on the KTM Duke 200, a very simple and quick operation. First, ensure that the key is n…
How to Replace the Front Headlamp Bulb on a KTM Duke 200?
How to Replace the Front Headlamp Bulb on a KTM Duke 200?
Duke 200 In this tutorial, you will see how to replace the front headlamp bulb on a KTM Duke 200, a very simple and quick operation. First, ensure the key is …

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos