Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a KTM Duke 200?

Model: Ktm Duke 200
Part: Headlight bulb

Video tutorial

In this tutorial, you will see how to replace the front headlamp bulb on a KTM Duke 200, a very simple and quick operation. First, ensure the key is not inserted, then unscrew all the indicated screws located both below the display and on both sides of the headlamp.

Next, separate the instrument panel from the support, disconnect the power connector, and remove the large rubber cap. At this point, unclip the metal clip, remove the bulb from the housing, and insert the replacement. To reassemble, simply follow the reverse procedure.


Updated on 25 August 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a KTM Duke 200
How to Replace the Headlight Bulb on a KTM Duke 200
Duke 200 In this guide, find the main instructions to remove and replace the dipped beam bulb of the front headlight on a KTM Duke 200. First, place the motor…
Replacing the Front Headlamp Bulb on a KTM Duke 200
Replacing the Front Headlamp Bulb on a KTM Duke 200
Duke 200 In today's video, you will learn how to remove and replace the front headlamp bulb on a KTM Duke 200. First, remove the side screws located near the …
How to Replace the Front Headlight Bulb on the KTM Duke 200
How to Replace the Front Headlight Bulb on the KTM Duke 200
Duke 200 In this tutorial, see how to replace the front headlight bulb on the KTM Duke 200, a very simple and quick operation. First, ensure that the key is n…

Battery Replacement for the Ducati Monster 796

Let's see how to proceed with replacing the battery on a Ducati Monster 796. Open and remove the seat, unscrew the screws securing the flange around the fuel tank cap and those securing the two half-shells covering the tank, and remove everything. Unscrew and remove the plastic panel under the seat to also unscrew the screw fixing the tank. On the left side, you will find a bolt securing the tank to the frame; unscrew this as well to be able to slide and lift the tank from its position after disconnecting and temporarily sealing the fuel vapour breather hose. This gives you access to the battery; disconnect the terminals from the poles and unclip the securing strap, remove the old battery and replace it with a new one. Reattach the terminals, ensuring the correct polarity, secure the strap, and reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos