Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of an Aprilia RSV4?

Model: Aprilia Rsv4 1000
Part: Engine oil

Video tutorial

To replace the engine oil of an Aprilia RSV4, start by placing the bike on a level surface. Next, use the centre stand to lift the bike.

Remove the oil filler cap to allow air into the system and facilitate the drainage of the old oil. Position a container under the drain plug and unscrew it with a spanner. Once unscrewed, let the old oil drain completely into the container.

After replacing the drain plug, fill the engine with new oil up to the recommended level. Check the oil level and start the engine to evenly distribute the new oil. Once completed, you have finished the engine oil change for your Aprilia RSV4.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on the Aprilia RSV4
How to Change the Engine Oil and Oil Filter on the Aprilia RSV4
Rsv4 1000 In this guide, you will learn how to replace the engine oil and oil filter, performing the routine maintenance service on the Aprilia RSV4, by follow…
How to Change the Engine Oil on the Aprilia RSV4 1000
How to Change the Engine Oil on the Aprilia RSV4 1000
Rsv4 1000 This guide explains how to replace the engine oil and oil filter during the regular maintenance service on the Aprilia RSV4 1000. First, remove the l…
How to replace the engine oil and oil filter of the Aprilia RSV4 1000 Factory
How to replace the engine oil and oil filter of the Aprilia RSV4 1000 Factory
Rsv4 1000 In this guide, we will see the main instructions on how to perform the routine maintenance service, replacing the engine oil and oil filter, of the A…

How to Replace the Fork on the GasGas TXT 125?

To replace the fork on the GasGas TXT 125, first completely remove the front wheel of the bike: to do this, loosen the screws that secure the corresponding brake caliper and then loosen the nuts located on the sides of the central axle. Once the wheel is removed, you can loosen the screws that secure the fork from the top just below the steering: at this point, it will be possible to remove it completely so that you can insert the new one, securing it properly and checking its operation.

Watch the video!


by ScegliAuto

More videos