Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fork of the GasGas TXT 125?

Model: Gasgas Txt 125
Part:

Video tutorial

In order to replace the fork of the GasGas TXT 125, you first need to remove the front wheel of the motorcycle completely: to do this, you will need to loosen the screws that secure the corresponding brake caliper and then loosen the nuts located on the side parts of the central axle.

Once the wheel has been removed, you can loosen the screws that secure the fork from the top immediately below the handlebars: at this point, it will be possible to remove it completely so that the new one can be inserted, securing it properly and checking its operation.


Posted on 16 December 2024 by ScegliAuto


Related tutorials

How to Replace the Exhaust on the GasGas TXT 125?
How to Replace the Exhaust on the GasGas TXT 125?
Txt 125 To replace the exhaust on the GasGas TXT 125, loosen the screws that secure it to the corresponding supports located on the side of the bike: the scr…
How to Replace the Exhaust on a GasGas TXT 125
How to Replace the Exhaust on a GasGas TXT 125
Txt 125 You can replace the exhaust on the GasGas TXT 125 by loosening the screws that secure the exhaust end can to the appropriate supports: these are loca…
How to Replace the Rear Shock Absorber on the GasGas TXT 125
How to Replace the Rear Shock Absorber on the GasGas TXT 125
Txt 125 To replace the rear shock absorber on the GasGas TXT 125, loosen the bolts securing this component to its housing. This is located between the rear m…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos