Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Shock Absorber on the GasGas TXT 125

Model: Gasgas Txt 125
Part: Shocks

Video tutorial

To replace the rear shock absorber on the GasGas TXT 125, loosen the bolts securing this component to its housing. This is located between the rear mudguard and the beginning of the rear swingarm.

Loosen the bolts from both the top and bottom to completely remove the old shock absorber, allowing the new one to be fitted into place. Secure it with the appropriate bolts to ensure everything functions correctly.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

Txt 125 To remove the rear mudguard of the GasGas TXT 125, you first need to remove the seat from its housing. To do this, you will need to loosen the screws…
Txt 125 To replace the clutch on a GasGas TXT 125, loosen the screws securing the cover on the right side of the engine: this will allow you to remove the co…
Txt 125 You can replace the clutch on the GasGas TXT 125 by loosening the screws that secure the cover panel on the left side of the bike: once this panel is…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos