|
Do it yourself
| |||
| ||||
Model: Gasgas Txt 125
To remove the rear mudguard of the GasGas TXT 125, you first need to remove the seat from its housing. To do this, you will need to loosen the screws that secure it. Once the seat is removed, you can locate the screws underneath that secure the mudguard, which can then be detached by loosening the screws that hold it in place. Once removed, you can insert the new replacement part, securing it and reinstalling the seat.
Updated on 19 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Txt 125
In order to replace the rear shock absorber of the GasGas TXT 125, you must loosen the screws that secure this component to its housing: this can be …
Txt 125
You can replace the exhaust on the GasGas TXT 125 by loosening the screws that secure the exhaust end can to the appropriate supports: these are loca…
Txt 125
In order to replace the exhaust pipe of the GasGas TXT 125, you need to loosen the screws that hold it to the corresponding supports, which are locat…
|
How to Replace the Battery in a Yamaha FZ6?
Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |