Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

- Do-it-yourself video guides

Triumph Street Twin
How to disassemble the rear fender of the Triumph Street Twin
Today's guide will show us the steps that will allow us to disassemble and replace the rear fender of the Triumph Street Twin motorcycle. First, we put the …read all…
Posted on 16 April 2024 by ScegliAuto
Gasgas Txt 125
How do you remove the rear fender of the GasGas TXT 125?
In order to remove the rear fender of the GasGas TXT 125, first you need to remove the seat from its housing: to remove the seat, you will need to loosen the …read all…
Posted on 24 September 2023 by ScegliAuto
Husqvarna Fc 350
How do you replace the rear fender of the Husqvarna FC 350?
In order to replace the rear fender of the Husqvarna FC 350, you need to completely remove the seat in order to access the screws that secure the fender from …read all…
Posted on 28 July 2023 by ScegliAuto
Ktm Exc 250
How to remove the rear fender of the Ktm Exc 250.
In this guide, we will see the steps on how to disassemble and replace the rear fender of the Ktm Exc 250 enduro motorcycle, following the instructions below. …read all…
Posted on 29 April 2023 by ScegliAuto
Ktm Exc 530
How do you replace the rear fender of the KTM EXC 530?
In order to replace the rear fender of the KTM EXC 530, you need to loosen the screws that hold it to its housing from the bottom; then you will need to loosen …read all…
Posted on 17 April 2023 by ScegliAuto
Ducati Monster 696
How to replace the rear mudguard on the Ducati Monster 696?
In this tutorial we can see how to replace the rear mudguard on the Ducati Monster 696, an extremely simple and fast operation. First of all we remove the …read all…
Posted on 19 April 2023 by ScegliAuto
Husqvarna Fe 350
How do you replace the rear fender on the Husqvarna FE 350?
In order to remove the rear fender of the Husqvarna FE 350 you have to loosen the bolts that secure the saddle to its housing, so that it can be removed …read all…
Posted on 24 October 2022 by ScegliAuto
Moto Guzzi V7 Iii
How to replace the rear fender of the Moto Guzzi V7 III
In this video tutorial we will see how to remove and replace the rear fender of the Moto Guzzi V7 III, following the instructions below. First we put our bike …read all…
Posted on 22 October 2022 by ScegliAuto
Peugeot Citystar 125
How to replace the rear fender of the Peugeot Citystar 125?
In order to replace the rear mudguard of the Peugeot Citystar 125 you have to loosen the screws located on the side of the mudguard using a socket wrench. This …read all…
Posted on 13 March 2024 by ScegliAuto
Moto Guzzi V 7
How do you remove the rear fender of the Moto Guzzi V7?
In order to remove the rear mudguard of the Moto Guzzi V7, the saddle must first be removed to gain access to its screws underneath. The screws to be loosened …read all…
Posted on 28 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos