Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Mudguard from the KTM EXC 250

Model: Ktm Exc 250
Part:

Video tutorial

This guide outlines the steps to remove and replace the rear mudguard of the KTM EXC 250 enduro bike, following the instructions provided below. First, place your bike on a stand and begin unscrewing the fixing screws found under the rear mudguard; then remove the seat and subsequently detach the side chains by unscrewing the additional screws, as illustrated in the video.

At this point, remove and replace the rear mudguard with the new one, securing it properly with its screws, following the video tutorial to the end!


Updated on 24 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on the KTM EXC 250
How to Replace the Rear Brake Pads on the KTM EXC 250
Exc 250 This guide provides instructions to remove and replace the rear brake pads on the KTM EXC 250 enduro motorcycle, as well as the EXC 300 and XC models…
How to Replace the Front Wheel on a KTM Exc 250
How to Replace the Front Wheel on a KTM Exc 250
Exc 250 The following steps will guide you through removing and replacing the front wheel on the KTM Exc 250 enduro bike, as well as the Exc 300 and Exc 125 …
How to Dismantle the Engine of a KTM EXC 250?
How to Dismantle the Engine of a KTM EXC 250?
Exc 250 The engine block of the KTM EXC 250 can be dismantled by loosening the screws that secure the engine block within its housing, completely removing it…

How to set the time on a Yamaha MT-15?

In this tutorial, you will see how to set the time on a Yamaha MT-15. This operation is extremely simple and quick, for example, to be done after the switch to daylight saving time or after disconnecting the battery. First, insert the key, then press and hold the two buttons located at the bottom left of the display, and simultaneously turn on the instrument panel. Wait for the clock to start flashing, adjust the hour by pressing the "Reset" button, switch to minutes with the "Select" button, and similarly adjust them before saving the setting.

Watch the video!


by ScegliAuto

More videos