Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ktm Exc 250
Part: Wheel

The following steps will guide you through removing and replacing the front wheel on the KTM Exc 250 enduro bike, as well as the Exc 300 and Exc 125 models. First, lift the front wheel off the ground and undo the bolts securing the front brake caliper; then, unscrew the front wheel axle to remove it, as shown in the video. At this point, replace the brake disc or pads if necessary; install the new original components and finally refit the front wheel, following the video tutorial to the end!

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Exc 250 To remove the forks from the KTM EXC 250, loosen the bolts securing them from the top: these bolts are located just below the handlebars. Once these …
Exc 250 In this video tutorial, you will learn how to remove and replace the grips on the 2016 KTM EXC 250, following the instructions below. First, remove t…
Exc 250 This guide provides instructions to remove and replace the rear brake pads on the KTM EXC 250 enduro motorcycle, as well as the EXC 300 and XC models…

How to Replace the Front Bulb on the Honda SH 125

This tutorial explains the steps to replace the front headlamp bulb on the Honda SH 125. This is a very simple procedure. First, remove the front shield of the scooter to access the bulb replacement. To perform this first step, unscrew the lower screw and the two upper screws that secure the cover. At this point, the bulb will be clearly visible. Simply unscrew the bulb and insert a new one. It is recommended to carry out this procedure after ensuring that the bulb to be removed has cooled down.

Watch the video!


by ScegliAuto

More videos