|
Do it yourself
| |||
| ||||
Model: Ktm Exc 525
To replace the battery installed on board the KTM EXC 520, you will need to insert the ignition key into the corresponding side lock: by turning the lock, you can release the seat from its housing in order to remove it and access the underlying components. The device can be removed from its seat by loosening the fixing screws of the supports and disconnecting the power cables: in this way it will be possible to insert the new battery so that it is connected and then covered by reinserting the seat.
Posted on 15 February 2025 by ScegliAuto
Video tutorial
Related tutorials
Exc 525
In this brief guide, we will see the instructions that will allow us to remove and possibly replace the carburettor of the KTM EXC 525 motorcycle. Fi…
Exc 525
Follow these instructions to drain and refill the engine oil of the KTM EXC 525 enduro bike. First, place your bike on a stand and start the drainage…
Exc 525
Today, we will see, in this video tutorial, how to install the clutch discs and bell on a KTM EXC 525, following the instructions below. First, clean…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.073
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |