Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we will see how to reset the oil service on the Yamaha TMAX 530 scooter, a very simple and quick operation to perform only after completing the required scheduled maintenance work. Start by inserting the key and turning on the instrument panel; it is not necessary to start the engine. Then, reach the service interval by repeatedly pressing the button located to the left of the dashboard. Once done, press the same button once to initialise the reset and a second time to complete it. Finally, restart the instrument panel.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service on a Yamaha TMAX 530 Scooter?
How to Reset the Oil Service on a Yamaha TMAX 530 Scooter?
Tmax 530 In this tutorial, you will see how to reset the oil service on the Yamaha TMAX 530 scooter, a very simple and quick operation to perform only after c…
How to Replace the Rear Brake Pads on the Yamaha Tmax 530
How to Replace the Rear Brake Pads on the Yamaha Tmax 530
Tmax 530 Here are the steps and guide necessary to remove and replace the rear brake pads on the Yamaha Tmax 530 scooter. First, place the scooter on its stan…
How to Change the Engine Oil in a Yamaha TMAX 530 Scooter?
How to Change the Engine Oil in a Yamaha TMAX 530 Scooter?
Tmax 530 In this tutorial, see how to change the engine oil in a Yamaha TMAX 530 scooter, a very simple and quick operation. Before proceeding, ensure the eng…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos