Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Rr 390
Part: Radiator

To replace the radiator on the Beta RR 390, first loosen the drain cap of the reservoir containing the coolant: this is located on the left side of the bike. Once all the coolant has been removed, loosen the screws securing the left front panel of the bike to gain access to the screws and pipes connected to the radiator: the radiator can now be freed from its housing, replaced with a new spare part, and then reassemble all the removed components.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the fork of the Beta RR 390?
How do you replace the fork of the Beta RR 390?
Rr 390 In order to replace the fork of the Beta RR 390, it is necessary to completely remove the front wheel of the vehicle: to do this, you will need to lo…
How to change the engine oil of the Beta RR 390
How to change the engine oil of the Beta RR 390
Rr 390 Today, we will discover the procedure to change the engine oil of the Beta RR 390 enduro bike. First, put the bike on a stand and start unscrewing th…
How to Install a New Tailpiece and Number Plate Holder on the Beta RR 390
How to Install a New Tailpiece and Number Plate Holder on the Beta RR 390
Rr 390 This guide provides instructions for installing a new rear tailpiece, along with the number plate holder and light, on the Beta RR 390. First, place …

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos