Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil of the Beta RR 390

Model: Beta Rr 390
Part: Engine oil

Video tutorial

Today, we will discover the procedure to change the engine oil of the Beta RR 390 enduro bike. First, put the bike on a stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover, which is located on the left, removing and replacing the cartridge with the new one. Next, unscrew the oil filler cap and pour in the suitable oil for your engine, filling until you reach the maximum level mark.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

How to Replace the Radiator on the Beta RR 390?
How to Replace the Radiator on the Beta RR 390?
Rr 390 To replace the radiator on the Beta RR 390, first loosen the drain cap of the reservoir containing the coolant: this is located on the left side of t…
How do you replace the fork of the Beta RR 390?
How do you replace the fork of the Beta RR 390?
Rr 390 In order to replace the fork of the Beta RR 390, it is necessary to completely remove the front wheel of the vehicle: to do this, you will need to lo…
How to Install a New Tailpiece and Number Plate Holder on the Beta RR 390
How to Install a New Tailpiece and Number Plate Holder on the Beta RR 390
Rr 390 This guide provides instructions for installing a new rear tailpiece, along with the number plate holder and light, on the Beta RR 390. First, place …

How to set the clock on the Piaggio Beverly 125?

To adjust the clock on the Piaggio Beverly 125, turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is on, press and hold the SET button located in the centre of the display. At this point, the hours will start to flash and can be changed with another prolonged press of the same button; pressing the SET button twice in quick succession will cause the minutes to start flashing, which can be modified in the same way.

Watch the video!


by ScegliAuto

More videos