Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fork of the Beta RR 390?

Model: Beta Rr 390
Part:

Video tutorial

In order to replace the fork of the Beta RR 390, it is necessary to completely remove the front wheel of the vehicle: to do this, you will need to loosen the bolts that secure the central axle of the wheel in order to completely remove it. At this point, it will be possible to loosen the screws that attach the brake caliper to its housing, completely detaching it from the disc.

In this way, you can proceed by loosening the screws that attach the fork to the steering at the top: by doing so, it will be possible to completely remove it and install the new one.


Posted on 10 March 2025 by ScegliAuto


Related tutorials

How to Replace the Radiator on the Beta RR 390?
How to Replace the Radiator on the Beta RR 390?
Rr 390 To replace the radiator on the Beta RR 390, first loosen the drain cap of the reservoir containing the coolant: this is located on the left side of t…
How to change the engine oil of the Beta RR 390
How to change the engine oil of the Beta RR 390
Rr 390 Today, we will discover the procedure to change the engine oil of the Beta RR 390 enduro bike. First, put the bike on a stand and start unscrewing th…
How do you replace the spark plug on the Beta RR 390?
How do you replace the spark plug on the Beta RR 390?
Rr 390 To replace the spark plug of the Beta RR 390, you need to loosen the screws that secure the motorcycle seat to its housing: these screws can be found…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos