Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. : Radiator

Radiator - Do-it-yourself video guides

Gasgas Ec 300
How to install the cooling radiator on the Gasgas EC 300
Below we will see the instructions that will allow us to install the cooling radiator on the Gasgas EC 300 enduro motorcycle. The motorcycle is already set up …read all…
Posted on 14 May 2024 by ScegliAuto
Mvagusta Stradale 800
How do you replace the radiator of the MV Agusta Stradale 800?
In order to replace the radiator of the MV Agusta Stradale 800, you need to loosen the bolts that secure the tubes connected to the radiator, on the front side …read all…
Posted on 1 December 2023 by ScegliAuto
Beta 300 Rr
How do you replace the radiator of the Beta 300 RR?
The replacement of the radiator of the Beta 300 RR is done by loosening the screws that secure the left side fairing at the front of the vehicle: once it has …read all…
Posted on 26 September 2023 by ScegliAuto
Beta Rr 390
How do you replace the radiator of the Beta RR 390?
In order to replace the radiator of the Beta RR 390, first you need to loosen the drain plug of the coolant tank, which can be found on the left side of the …read all…
Posted on 29 August 2023 by ScegliAuto
Aprilia Rsv 1000
How to disassemble the radiator of the Aprilia RSV 1000R.
In this guide, we will see the main instructions that will allow us to disassemble and replace the cooling radiator of the Aprilia RSV 1000R motorcycle. First …read all…
Posted on 12 July 2023 by ScegliAuto
Sherco Se R 250
How do you install the radiator guards on the Sherco SE 250?
In order to install the radiator guards on the Sherco SE 250 it is necessary to completely disassemble the fairings located on the front side of the bike: …read all…
Posted on 13 November 2022 by ScegliAuto
Mvagusta F4 1000r
How to replace the radiator of the MV Agusta F4 1000R?
In order to replace the radiator of the MV Agusta F4 1000R you have to loosen the screws that fix the front side panels of the bike, so that they can be …read all…
Posted on 7 November 2022 by ScegliAuto
Husaberg Fs 650 Supermoto
How do I replace the radiator fan on the Husaberg FS 650?
In order to replace the Husaberg FS 650 radiator fan, you need to loosen all the side panels that are on the right side of the bike. By unscrewing these …read all…
Posted on 1 September 2022 by ScegliAuto
Ktm Duke 690
Ktm Duke 690 radiator replacement
Today we will see, in this video tutorial, how to disassemble and replace the engine cooling radiator of the Ktm Duke 690 motorcycle. First we put the stand on …read all…
Posted on 11 May 2024 by ScegliAuto
Beta Rr 300
How to remove the Beta RR 300 radiator
In this video tutorial we will see how to disassemble and replace the cooling radiator of the Beta RR 300 enduro motorcycle, following the instructions below. …read all…
Posted on 7 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos