Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sherco Se 200
Part: Radiator

To replace the radiator located at the front of the motorcycle, immediately behind the front fork: in order to free the radiator from its housing, you will need to unscrew the screws that hold it in place so that you can disconnect its connectors and also remove the appropriate tubes for the coolant flow. Once the old radiator has been completely removed, you can insert the new one into its housing: it should be secured with the corresponding screws, and the tubes and connectors should be reattached to the component.

Posted on 6 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Se 300 In order to replace the radiator hoses of the Sherco SE 300, you need to loosen the side protective panels that cover the hoses: once these panels ha…
Sef 300 In today's video tutorial, you will learn how to install radiator protection guards on a Sherco 300 SEF Factory in simple steps. First, remove the se…
Sherco 250 To replace the coolant in the Sherco 250, first, remove the radiator cap located at the front of the bike. Once the radiator cap is open, you can the…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos