Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the radiator of the MV Agusta F4 1078RR, you need to loosen the screws that hold it in place in the front part of the bike, just behind the front wheel. Once the screws attaching it to the supports are loosened, you can completely detach the old radiator after disconnecting the connectors and coolant hoses. Once the old radiator is removed, you can install the new one, which must be properly secured and connected, and its functionality verified.

Posted on 24 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the MV Agusta F4 1078RR?
How do you replace the exhaust pipe of the MV Agusta F4 1078RR?
F4 1078rr The procedure for replacing the exhaust pipe of the MV Agusta F4 1078RR can be carried out by loosening the screws that secure the exhaust pipe at th…
How to replace the exhaust on the MV Agusta F4 1078RR?
How to replace the exhaust on the MV Agusta F4 1078RR?
F4 1078rr To replace the exhaust on the MV Agusta F4 1078RR, loosen the screws that secure the right fairing of the bike. Once these screws are loosened, you c…
How to Replace the Clutch on the MV Agusta F4 1078RR
How to Replace the Clutch on the MV Agusta F4 1078RR
F4 1078rr To replace the clutch on the MV Agusta F4 1078RR, you need to unscrew the bolts securing the cover on the right side of the bike: once these bolts ar…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos