Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Location for the Yamaha Xmax

Model: Yamaha Xmax 300
Part: Fuse box

Video tutorial

Today, we will look at the fuse location for the Yamaha Xmax scooter. The main fuses, along with the ignition relay, are located at the front of the scooter.

To access them, you need to remove the front headlamp and the plastic fairings, as shown in the video. At this point, open the cover to access the ignition fuses and the relay; use the owner's manual to locate the fuse diagram and replace the faulty fuse with a new one of the correct type and amperage.

Then reassemble everything!


Updated on 14 August 2026 by ScegliAuto


Related tutorials

Where to Find the Fuses of the Yamaha Xmax 300
Where to Find the Fuses of the Yamaha Xmax 300
Xmax 300 This brief guide will illustrate the steps to access the fuse box of the Yamaha Xmax 300 scooter. First, put the central stand down and start unscrew…
Where is the fuse box located on the Yamaha X Max 300?
Where is the fuse box located on the Yamaha X Max 300?
Xmax 300 Today we will explain how to access the fuse box of the Yamaha XMax 300. Inside this type of scooter there is a fuse box that is installed inside the…
How to Install or Replace the Mirrors on a Yamaha Xmax
How to Install or Replace the Mirrors on a Yamaha Xmax
Xmax 300 Today's guide will show you the steps to remove and replace the mirrors on the Yamaha Xmax scooter. First, put the central stand down and start insta…

How to Replace the Thermostat on the Gasgas EC 300

This guide provides the main instructions on how to remove and replace the radiator thermostat on the Gasgas EC 300 enduro bike. First, place your bike on a stand and disconnect the radiator hose, draining the fluid into a container for about ten minutes; then unscrew the thermostat screws to remove it from the radiator, as shown in the video. At this point, install the new original thermostat valve, securing it to the radiator, then pour in the new coolant and start the engine to circulate it!

Watch the video!


by ScegliAuto

More videos