Do it yourself
Frequently asked questions about cars and motorcycles
Today, you will see step-by-step instructions for removing the rear wheel to potentially replace the tyre on a Harley Davidson Dyna. First, remove the exhaust silencer; to do this, unscrew the bolts located underneath, as shown in the video. Next, remove the metal cotter pin from the central axle of the wheel. Use a 24 mm socket spanner to unscrew the central axle. Now, lift the bike with a jack and completely remove the rear wheel, then reassemble everything!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Dyna It will be possible to replace the clutch of the Harley Davidson Dyna by loosening the transmission cover located on the lower right side of the moto…
Dyna In this video, learn how to remove the main ignition fuse on a Harley Davidson Dyna Low Rider in simple and quick steps. First, remove the metal cove…
Dyna To replace the rear brake pads on the Harley Davidson Dyna, detach the right side panel of the bike, which is located next to the rear wheel. Once th…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos