Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Speedometer on the Harley Davidson Dyna

Model: Harley Davidson Dyna
Part: Instrument cluster

Video tutorial

In this brief guide, you will find instructions that will allow you to remove and replace the speedometer on the Harley Davidson Dyna. First, place the motorcycle on its stand and begin unscrewing the two mounting screws of the speedometer, located on the fuel tank; then remove the cover along with the speedometer, disconnecting the electrical wiring underneath, as shown in the video.

At this point, perform the repair or replace the speedometer with the new one, reinstalling it correctly on the tank and reconnecting it; all that remains is to check its operation.


Posted on 17 June 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Wheel of a Harley Davidson Dyna
How to Remove the Rear Wheel of a Harley Davidson Dyna
Dyna Today, you will see step-by-step instructions for removing the rear wheel to potentially replace the tyre on a Harley Davidson Dyna. First, remove th…
Replacing the Starter Motor on a Harley Davidson Dyna
Replacing the Starter Motor on a Harley Davidson Dyna
Dyna Below are the steps to remove and replace the starter motor on a Harley Davidson Dyna motorcycle. First, place your motorcycle on a stand and begin b…
How to Remove the Rear Wheel of a Harley Davidson Dyna
How to Remove the Rear Wheel of a Harley Davidson Dyna
Dyna In this brief and simple guide, you will learn how to remove the rear wheel, replacing the tyre if necessary, of the Harley Davidson Dyna motorcycle.…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos