Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xmax 300
Part: Fuse box

This brief guide will show us the steps that will allow us to reach the fuse box of the Yamaha Xmax 300 scooter. First, we put the center stand and start unscrewing the screws and removing the plastic clips of the cover located under the instrument panel; we then remove the front plastic to access the fuse box (opening the small cover), as shown in the video. At this point, we remove and replace any blown fuse, using the fuse diagram in the vehicle's owner's manual; then we reassemble everything!

Posted on 30 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the battery located in the Yamaha XMAX 300 scooter?
Where is the battery located in the Yamaha XMAX 300 scooter?
Xmax 300 In this video we can see where the battery is located in the Yamaha XMAX 300 scooter and how to access it, useful in case we need to replace it, an e…
Where is the fuse box located on the Yamaha X Max 300?
Where is the fuse box located on the Yamaha X Max 300?
Xmax 300 Today we will explain how to access the fuse box of the Yamaha XMax 300. Inside this type of scooter there is a fuse box that is installed inside the…
Fuse Location for the Yamaha Xmax
Fuse Location for the Yamaha Xmax
Xmax 300 Today, we will look at the fuse location for the Yamaha Xmax scooter. The main fuses, along with the ignition relay, are located at the front of the …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos