Do it yourself
Frequently asked questions about cars and motorcycles
This short guide will show us how to reset the maintenance service light of the regular oil change for the Yamaha Xmax 300 scooter. First, we put the scooter on the stand and start the instrument panel; then we go to the service menu and press the button on the lower right side of the handlebars to the left, as shown in the video. At this point, we will see the service mileage counter flashing until it is correctly reset; this way we will have reset the maintenance key and the service!

Posted on 4 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Xmax 300 Today we will see the procedure for resetting the maintenance service light for the oil change on the Yamaha Xmax 300 scooter. First, we put the scoo…
Xmax 300 The following steps will allow us to reset the maintenance service reminder for the engine oil change of the Yamaha Xmax 300 scooter. First, we put t…
Xmax 300 In this short guide, we will see the instructions to reset the service light for the routine maintenance of the engine oil change of the Yamaha Xmax …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos