Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gasgas Jtx 270
Part:

In order to replace the rear fender of the GasGas JTX 270, you need to loosen the screws that secure the seat of the bike to its housing, so that it can be completely detached from its seat: once the seat has been removed, you can locate the screws that secure the rear fender to its housing. You will then need to unscrew all the screws underneath and completely detach the fender: at this point you can insert the new replacement piece so that it is secured. You will need to reposition the seat on its housing and secure it as well.

Posted on 17 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Gasgas JTX 270?
How to Change the Engine Oil on a Gasgas JTX 270?
Jtx 270 In this guide, we will discover the instructions for changing the engine oil on the Gasgas JTX 270 enduro bike. First, place the bike on a stand and …
How do you disassemble the engine of the GasGas JTX 270?
How do you disassemble the engine of the GasGas JTX 270?
Jtx 270 To disassemble the GasGas JTX 270 engine, you need to loosen the screws that secure the block to its housing in the center of the frame: once the eng…
How do you disassemble the engine of the GasGas JTX 270?
How do you disassemble the engine of the GasGas JTX 270?
Jtx 270 To disassemble the GasGas JTX 270 engine, you need to loosen the screws that hold it to its housing, so that it can be completely freed from the fram…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos