Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Gasgas JTX 270?

Model: Gasgas Jtx 270
Part: Engine oil

Video tutorial

In this guide, we will discover the instructions for changing the engine oil on the Gasgas JTX 270 enduro bike. First, place the bike on a stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Replace the oil filter if necessary, then unscrew the filler cap. At this point, top up with new engine oil that meets the appropriate specifications; add the correct amount and start the engine, checking that the level is at the maximum mark.


Posted on 22 June 2026 by ScegliAuto


Related tutorials

How do you disassemble the engine of the GasGas JTX 270?
How do you disassemble the engine of the GasGas JTX 270?
Jtx 270 To disassemble the GasGas JTX 270 engine, you need to loosen the screws that secure the block to its housing in the center of the frame: once the eng…
How to remove the engine from the GasGas JTX 270?
How to remove the engine from the GasGas JTX 270?
Jtx 270 To remove the engine from the GasGas JTX 270, loosen the bolts that secure it to its housing, allowing you to free it completely from the frame: also…
How do you replace the rear fender of the GasGas JTX 270?
How do you replace the rear fender of the GasGas JTX 270?
Jtx 270 In order to replace the rear fender of the GasGas JTX 270, you need to loosen the screws that secure the seat of the bike to its housing, so that it …

How to Change the Engine Oil in the Yamaha MT-15?

In this tutorial, you will learn how to change the engine oil in the Yamaha MT-15, a very simple and quick operation. First, ensure that the engine is cool enough. Then, position a container beneath the motorcycle, locate the drain bolt, and loosen it using a socket spanner. Allow all the oil in the system to drain out. Next, open the filter cap and insert the replacement. Finally, reassemble everything and pour in the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos