Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Gasgas Jtx 270 - Video guides

Gasgas Jtx 270
How to Change the Engine Oil on a Gasgas JTX 270?
In this guide, we will discover the instructions for changing the engine oil on the Gasgas JTX 270 enduro bike. First, place the bike on a stand and start …Read all…
Posted on 22 June 2026 by ScegliAuto
Gasgas Jtx 270
How do you replace the rear fender of the GasGas JTX 270?
In order to replace the rear fender of the GasGas JTX 270, you need to loosen the screws that secure the seat of the bike to its housing, so that it can be …Read all…
Posted on 18 October 2025 by ScegliAuto
Gasgas Jtx 270
How do you disassemble the engine of the GasGas JTX 270?
To disassemble the GasGas JTX 270 engine, you need to loosen the screws that secure the block to its housing in the center of the frame: once the engine is …Read all…
Posted on 24 September 2025 by ScegliAuto
Gasgas Jtx 270
How do you disassemble the engine of the GasGas JTX 270?
To disassemble the GasGas JTX 270 engine, you need to loosen the screws that hold it to its housing, so that it can be completely freed from the frame: you …Read all…
Posted on 27 October 2024 by ScegliAuto

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos