Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Triumph Street Twin
Part:

Today's guide will show us the steps that will allow us to disassemble and replace the rear fender of the Triumph Street Twin motorcycle. First, we put the motorcycle on the center stand and start disassembling and removing the seat; then we disconnect the electrical wiring of the rear light control unit, as shown in the video. At this point, we unscrew the fixing screws of the rear fender, removing it together with the taillight; we replace it with the new one and finally reassemble the fender with all its components, applying the reverse process of disassembly!

Posted on 16 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlight on a Triumph Street Twin
How to Remove the Front Headlight on a Triumph Street Twin
Street Twin Before you start, position your Triumph Street Twin on a paddock stand. Begin by unscrewing and removing the screws that secure the front headlight t…
How to replace the spark plug of a Triumph Street Twin?
How to replace the spark plug of a Triumph Street Twin?
Street Twin Good morning, today's guide aims to replace the spark plug of our Triumph Street Twin. Let's start by disassembling and removing the side fairings of…
Replacing the Battery in the Triumph Street Twin
Replacing the Battery in the Triumph Street Twin
Street Twin Let’s see in this short and simple guide how to replace the battery in the Triumph Street Twin motorcycle, following the instructions below. First, r…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos