Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear fender of the KTM EXC-F 500

Model: Ktm Exc F 500
Part:

Video tutorial

Today's main steps will show us how to disassemble and replace the rear fender of the KTM EXC-F 500 enduro motorcycle. First, we put the motorcycle on the stand and start by removing the rider/passenger seat; then we proceed to remove the rear fender fairings by unscrewing all the fixing screws, as shown in the video.

At this point, we unscrew the screws of the fender and tail to remove it, replacing it if necessary with a new one; we reassemble all the components in order and then reassemble the seat last, following the video tutorial until the end!


Posted on 10 August 2025 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulb on the KTM EXC-F 500
Replacing the Front Headlight Bulb on the KTM EXC-F 500
Exc F 500 .. the front headlight bulb on the KTM EXC-F 500 enduro bike. First, remove the front headlight by unscrewing the screws to access the rear of the.. …
How to Remove the ECU from the KTM EXC 500
How to Remove the ECU from the KTM EXC 500
Exc F 500 In today's tutorial, you will learn how to remove and replace the engine control unit (ECU) of the KTM EXC 500 enduro bike by following these simple …
How to Change the Engine Oil on the KTM EXC-F 500
How to Change the Engine Oil on the KTM EXC-F 500
Exc F 500 .. the routine maintenance service on the KTM EXC-F 500 enduro bike. First, remove the oil drain bolt located under the engine, allowing the oil to drain.. …

How to Change the Engine Oil in the Suzuki GSX-S1000?

Changing the engine oil in the Suzuki GSX-S1000, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath and remove the lower fairing. Next, locate the drain hole bolt, unscrew it using a socket spanner, and allow all the oil in the system to drain out. At this point, simply unscrew the old filter, tighten both the replacement and the bolt, and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos