Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on the KTM EXC-F 500

Model: Ktm Exc F 500
Part: Headlight bulb

Video tutorial

In this guide, we will see the necessary instructions for disassembling and replacing the front headlight bulb on the KTM EXC-F 500 enduro bike. First, remove the front headlight by unscrewing the screws to access the rear of the headlight; then disconnect the electrical connector of the bulb to remove it from the headlight, as shown in the video.

At this point, replace the dipped beam bulb with a new one of the correct type (in this case, H4); connect the light and reassemble the front headlight!


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on the KTM EXC 500
How to Replace the Front Headlight Bulb on the KTM EXC 500
Exc F 500 In today's tutorial, you will learn how to remove and replace the front headlight bulb or the entire headlamp with an LED type on the KTM EXC 500. Fi…
How to Change the Engine Oil in a KTM EXC-F 500?
How to Change the Engine Oil in a KTM EXC-F 500?
Exc F 500 .. Changing the engine oil in the KTM EXC-F 500 is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, wait.. …
How to Change the Engine Oil on the KTM EXC-F 500
How to Change the Engine Oil on the KTM EXC-F 500
Exc F 500 .. the routine maintenance service on the KTM EXC-F 500 enduro bike. First, remove the oil drain bolt located under the engine, allowing the oil to drain.. …

How to Replace the Rear Brake Pads on a Derbi Senda 125?

To replace the rear brake pads on a Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely removed from its housing. Once the wheel is removed, you can slide out the pin that secures the pads inside the brake caliper and remove them from their housing. After the old pads have been removed, insert the new replacement parts, securing them with the pin. Finally, reinstall the rear wheel, positioning it at the end of the swingarm.

Watch the video!


by ScegliAuto

More videos