Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on the KTM EXC 500

Model: Ktm Exc F 500
Part: Headlight bulb

Video tutorial

In today's tutorial, you will learn how to remove and replace the front headlight bulb or the entire headlamp with an LED type on the KTM EXC 500. First, move to the front of the motorcycle and start removing the front headlight; to do this, unscrew the screws located at the top and disconnect the electrical connector of the bulb to remove it, as shown in the video.

At this point, replace the bulb or the entire front optical unit if necessary; then reassemble everything by following the reverse procedure of disassembly!


Updated on 14 June 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulb on the KTM EXC-F 500
Replacing the Front Headlight Bulb on the KTM EXC-F 500
Exc F 500 In this guide, we will see the necessary instructions for disassembling and replacing the front headlight bulb on the KTM EXC-F 500 enduro bike. Firs…
How to Replace the Front Wheel of a KTM EXC 500
How to Replace the Front Wheel of a KTM EXC 500
Exc F 500 Today, in this brief and simple guide, we will provide instructions for removing and replacing the front wheel of the KTM EXC 500 enduro bike. First,…
How do you replace the front brake pads of the KTM EXC-F 500?
How do you replace the front brake pads of the KTM EXC-F 500?
Exc F 500 To replace the front brake pads of the KTM EXC-F 500, you will need to loosen the screws that secure the brake caliper to the corresponding disc: onc…

How to Replace the O-ring on the Clutch Rod of the LML Star?

To replace the O-ring on the clutch rod of the LML Star, lift the bike to loosen the side panel located near the rear wheel. Next, unscrew all the screws securing the rear wheel and the corresponding transmission cover: by removing the clutch, you will be able to locate the rod positioned behind it. This rod can now be removed from its housing by unscrewing the fastening screws; after the old rod has been removed, slide out the O-ring, replace it with a new one, and reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos