Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front brake pads of the KTM EXC-F 500?

Model: Ktm Exc F 500
Part: Brake pads

Video tutorial

To replace the front brake pads of the KTM EXC-F 500, you will need to loosen the screws that secure the brake caliper to the corresponding disc: once the caliper has been detached, it will be possible to remove the pin that locks the pads and lever them out of their housing.

At this point, it will be possible to proceed to insert the new replacement parts: the pads will need to be reattached by inserting the pin. Then, the caliper can be repositioned on the disc so that it can be secured and checked that everything is functioning properly.


Posted on 28 April 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a KTM EXC-F 500?
How to Change the Engine Oil in a KTM EXC-F 500?
Exc F 500 .. Changing the engine oil in the KTM EXC-F 500 is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, wait.. …
How to Remove the ECU from the KTM EXC 500
How to Remove the ECU from the KTM EXC 500
Exc F 500 In today's tutorial, you will learn how to remove and replace the engine control unit (ECU) of the KTM EXC 500 enduro bike by following these simple …
How to Replace the Front Wheel of a KTM EXC 500
How to Replace the Front Wheel of a KTM EXC 500
Exc F 500 Today, in this brief and simple guide, we will provide instructions for removing and replacing the front wheel of the KTM EXC 500 enduro bike. First,…

How to Replace the O-ring on the Clutch Rod of the LML Star?

To replace the O-ring on the clutch rod of the LML Star, lift the bike to loosen the side panel located near the rear wheel. Next, unscrew all the screws securing the rear wheel and the corresponding transmission cover: by removing the clutch, you will be able to locate the rod positioned behind it. This rod can now be removed from its housing by unscrewing the fastening screws; after the old rod has been removed, slide out the O-ring, replace it with a new one, and reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos