Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on the KTM EXC-F 500

Model: Ktm Exc F 500
Part: Engine oil

Video tutorial

In this video tutorial, you will see the main instructions for replacing the engine oil and oil filter, performing the routine maintenance service on the KTM EXC-F 500 enduro bike. First, remove the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; then, unscrew the screws of the oil filter cover to remove and replace the cartridge with a new one. At this point, open the fill hole and pour in the new engine oil, filling it to the correct level!


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Ktm Exc 500
How to Change the Engine Oil of the Ktm Exc 500
Exc F 500 In this brief and simple guide, we will outline the procedure to change the engine oil and oil filter of the Ktm Exc 500 enduro bike. First, place th…
How to change the engine oil on a KTM EXC 500 2022
How to change the engine oil on a KTM EXC 500 2022
Exc F 500 In this tutorial, you will learn how to perform the first service of the routine maintenance for the oil change on the KTM EXC 500 enduro bike, in si…
How to Change Oil and Filter on a KTM EXC F 500
How to Change Oil and Filter on a KTM EXC F 500
Exc F 500 .. How to change the oil and filter on a KTM EXC F 500? Follow this guide to proceed with the replacement. Position the motorcycle on a stand; remove.. …

How to Replace the Front Headlamp Bulb on a Harley-Davidson 883

In this tutorial, see how to replace the front headlamp bulb on a Harley-Davidson 883, a straightforward and quick operation. First, ensure the key is not inserted, then remove the outer ring of the headlamp by unscrewing the relevant bolt. Next, separate the headlamp from the base, disconnect the power connector, and remove the large rubber cap. At this point, release the metal clip, extract the old bulb, and insert the replacement, avoiding direct contact with the glass. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos