Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Mudguard of the Husqvarna FE 250

Model: Husqvarna Fe 250
Part:

Video tutorial

The following steps will show you the procedure for removing and replacing the rear mudguard of the Husqvarna FE 250 enduro bike. First, place the bike on a stand and start unscrewing all the fixing screws located under the rear mudguard using a star socket; then disconnect the wiring of the indicators fixed to the mudguard to remove it, as shown in the video.

At this point, install the new rear mudguard, finally reassembling the indicators, following the video tutorial to the end!


Updated on 6 November 2026 by ScegliAuto


Related tutorials

Fc 250 To replace the rear mudguard on the Husqvarna FC 250, start by loosening the bolts that secure the seat to its housing, allowing it to be completely …
Te 250 You can replace the exhaust end of the Husqvarna TE 250 by loosening the screws that secure the side cover panel of the rear mudguard. Once detached,…
Exc 250 This guide outlines the steps to remove and replace the rear mudguard of the KTM EXC 250 enduro bike, following the instructions provided below. Firs…

How to Set the Time on the Suzuki V-Strom 650?

In this tutorial, learn how to set the time on the Suzuki V-Strom 650, a simple and quick operation, for instance, after replacing the battery or switching to daylight saving time. First, insert the key, then turn on the instrument cluster and press both the "MODE" button upwards and the button to the left of the speedometer. Wait for the time to start flashing, release both buttons, and adjust the clock using the button on the dashboard. To save the setting, wait a few seconds.

Watch the video!


by ScegliAuto

More videos