Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear fender of the GasGas EC 300?

Model: Gasgas Ec 300
Part:

Video tutorial

To replace the rear fender of the GasGas EC 300, you need to loosen the screws that secure the seat of the motorcycle to its housing, allowing you to remove it and access the screws that hold the fender in place. These screws should be loosened and completely removed from the top; then you can proceed to loosen and remove the screws that secure the fender from the bottom so that it can be completely removed.

The new fender can now be positioned and secured with the corresponding screws; after installation, you will also need to reattach the seat.


Posted on 14 December 2025 by ScegliAuto


Related tutorials

How do you replace the rear shock absorber of the GasGas EC 300?
How do you replace the rear shock absorber of the GasGas EC 300?
Ec 300 In order to replace the rear shock absorber of the GasGas EC 300, you need to loosen the screws that fix the piece to its housing, in the area betwee…
How do you replace the rear wheel of the GasGas EC 300?
How do you replace the rear wheel of the GasGas EC 300?
Ec 300 To replace the rear wheel of the GasGas EC 300, you need to loosen the nuts that secure the central axle of the wheel: once these nuts have been loos…
Instructions for disassembling the starter motor on a Gasgas EC 300
Instructions for disassembling the starter motor on a Gasgas EC 300
Ec 300 In this video tutorial, you will see instructions on how to disassemble and replace the electric starter motor on a Gasgas EC 300 motorcycle. First, …

How to Change the Engine Oil of a Yamaha XT 250?

The Yamaha XT 250 is a motorcycle and, like all motorcycles, it does not use a flywheel or buttons for operations like changing the engine oil. Here’s the correct procedure: To change the engine oil of a Yamaha XT 250, ensure the bike is stable on a stand and that the engine is warm to facilitate oil drainage. Locate the oil drain plug under the engine and position a container to collect the used oil. Use a spanner to unscrew the drain plug and let the old oil drain completely. Remove the oil filter located on the side of the engine. Replace it with a new one, ensuring to lightly lubricate the seal with fresh oil before installing it. After installing the new filter, re-tighten the drain plug, being careful to avoid leaks. Find the oil filler cap on the top side of the engine and pour in the specified amount of new oil according to the XT 250 manual. Once filled, start the engine for a few minutes and check for leaks. Turn off the bike, let it rest for a moment, and check the oil level using the dipstick or indicator, adding more oil if necessary. This procedure ensures optimal lubrication for your Yamaha XT 250.

Watch the video!


by ScegliAuto

More videos