Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Engine of the Derbi Senda 50?

Model: Derbi Senda 50cc
Part: Engine

Video tutorial

It is possible to dismantle the engine of the Derbi Senda 50 by completely extracting the engine block from its housing, removing the side panels and freeing it from the frame after disconnecting the pipes and connectors. Once the engine has been removed, unscrew the screws that secure the two half casings to remove them and access the components inside.

Detach the ring that secures the piston to its connecting rod, and you can also loosen the bolts that secure the clutch; this way, it will be possible to replace the internal parts by reassembling everything.


Posted on 14 November 2026 by ScegliAuto


Related tutorials

How to Dismantle the Engine of the Derbi Senda 50?
How to Dismantle the Engine of the Derbi Senda 50?
Senda 50cc To dismantle the engine of the Derbi Senda 50, loosen the bolts securing the cylinder to the top of the engine block. Once the securing bolts are loo…
How to Replace the Spark Plug on a Derbi Senda 50
How to Replace the Spark Plug on a Derbi Senda 50
Senda 50cc This operation must be performed with the engine cold. Before starting, position your Derbi Senda 50 on the side stand. Begin by disconnecting the ca…
How to Start a Derbi Senda
How to Start a Derbi Senda
Senda 50cc Before you begin, sit on the seat of your Derbi Senda. Start by inserting the key into the ignition switch and turning it fully clockwise. Next, pull…

How to Change the Engine Oil in a Honda PCX 125 Scooter?

As shown in this tutorial, changing the engine oil in a Honda PCX 125 scooter is a straightforward and quick task. Before proceeding, ensure the engine is completely cold for safety. Start by placing a container under the scooter, then locate the drain bolt and unscrew it using a 12mm socket. Allow all the oil in the system to drain out, reinsert the bolt, and open the filter housing with a 17mm socket. Once all dirt residue is removed, you can add the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos