Do it yourself
Frequently asked questions about cars and motorcycles

Model: Derbi Senda 50cc
Part: Engine

To disassemble the engine of the Derbi Senda 50, you need to loosen the screws that secure the cylinder to the top of the engine block: once the fixing screws have been loosened, it will be possible to remove the cylinder to access the piston located inside it. The piston can be released from the connecting rod by expanding the corresponding ring and then removing the pin: at this point, you can access the crankshaft so that you can replace all the necessary components in order to close the engine block again.

Posted on 18 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Senda 50cc Before you begin, sit on the seat of your Derbi Senda. Start by inserting the key into the ignition switch and turning it fully clockwise. Next, pull…
Senda 50cc Before you can begin, position your Derbi Senda 50 on the side stand. Start by unscrewing and removing the bolts that secure the seat to the frame, l…
Senda 50cc To dismantle the engine of the Derbi Senda 50, completely remove its protective covers, taking off the side panels and extracting it from its housing…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos