Do it yourself
Frequently asked questions about cars and motorcycles

How to Start a Derbi Senda

Model: Derbi Senda 50cc
Part: Checks and maintenance

Video tutorial

Before you begin, sit on the seat of your Derbi Senda. Start by inserting the key into the ignition switch and turning it fully clockwise.

Next, pull out the starter lever located on the left side of the engine block, and pull and hold the clutch lever. At this point, repeatedly press the starter lever until the engine starts.

Once the engine is running, you can close the starter lever of your Derbi Senda, and you will have completed the procedure.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

Senda 50cc This operation must be performed with the engine cold. Before starting, position your Derbi Senda 50 on the side stand. Begin by disconnecting the ca…
Senda 50cc Before you can begin, position your Derbi Senda 50 on the side stand. Start by unscrewing and removing the bolts that secure the seat to the frame, l…
Senda 50cc To dismantle the gearbox on the Derbi Senda 50, first remove the clutch from its housing, then unscrew the screws securing the gearbox. At this point…

How to replace the air filter on a Sym VF3I?

To replace the air filter on a Sym VF3I, open the underseat compartment to access the screws and disconnect the battery connectors. The battery will then need to be removed from its housing, allowing access to the components underneath. Here, you will find the filter box cover, which should be removed by unscrewing the fastening screws. Once the old filter is removed, insert the new one into its place and secure the cover with the screws. Then, reinstall the battery and close the underseat compartment.

Watch the video!


by ScegliAuto

More videos