Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Derbi Senda 50cc
Part:

Before you can begin, position your Derbi Senda 50 on the side stand. Start by unscrewing and removing the bolts that secure the seat to the frame, located at the front and rear of the seat. Next, detach the clips that hold the seat to the frame. This will free the seat itself. At this point, unclip the rear hooks, then remove the seat from your Derbi Senda 50. Once you have completed this step, you will have successfully disassembled the seat.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plug on a Derbi Senda 50
How to Replace the Spark Plug on a Derbi Senda 50
Senda 50cc This operation must be performed with the engine cold. Before starting, position your Derbi Senda 50 on the side stand. Begin by disconnecting the ca…
How to Start a Derbi Senda
How to Start a Derbi Senda
Senda 50cc Before you begin, sit on the seat of your Derbi Senda. Start by inserting the key into the ignition switch and turning it fully clockwise. Next, pull…
How to Dismantle the Engine of a Derbi Senda 50?
How to Dismantle the Engine of a Derbi Senda 50?
Senda 50cc To dismantle the engine of a Derbi Senda 50, completely disassemble the unit by removing the side panels and extracting it from its housing after dis…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos