Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Exhaust on a GasGas TXT 125

Model: Gasgas Txt 125
Part: Exhaust muffler

Video tutorial

You can replace the exhaust on the GasGas TXT 125 by loosening the screws that secure the exhaust end can to the appropriate supports: these are located on the right side of the rear mudguard. Once the fixing screws have been removed, proceed by loosening the clamp connecting the manifold to the end can; at this point, you can remove the old exhaust to insert the new one. This can now be securely fastened and connected properly to ensure everything functions correctly.


Posted on 23 February 2026 by ScegliAuto


Related tutorials

Txt 125 To dismantle the engine of the GasGas TXT 125, loosen the screws that secure it to the corresponding mounts. Disconnect all connectors and detach the…
Txt 125 You can replace the clutch on the GasGas TXT 125 by loosening the screws that secure the cover panel on the left side of the bike: once this panel is…
Txt 125 To replace the water pump on the GasGas TXT 125, locate the pump on the right side of the bike, next to the clutch cover. To remove the water pump, d…

How to Replace the Engine Oil and Oil Filter of an Aprilia Tuono V4

In this guide, we will see the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter of the Aprilia Tuono V4 motorcycle. First, place the bike on the stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge, replacing it with a new one (screwing by hand and tightening gently), as shown in the video. At this point, top up with new engine oil, bringing the level to the maximum mark.

Watch the video!


by ScegliAuto

More videos