Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust of the TM Racing 300, you will need to loosen the screws that secure the panel located on the right side of the rear fender: once the screws have been loosened, it will be possible to detach the panel and locate the screws of the exhaust supports. By loosening these screws as well, you can widen the connecting clamp between the exhaust and the exhaust manifold: the new exhaust can now be positioned, connecting it with the corresponding ring and securing it to the supports with the screws that were just removed.

Posted on 16 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Tm Racing 300 The replacement of the exhaust on a TM Racing 300 can be done by loosening the screws that secure the exhaust terminal to its housing, near the rear …
Tm Racing 300 You can change the oil in the TM Racing 300 gearbox by loosening the drain plug located at the central bottom of the transmission: once this plug is …
Tm Racing 300 In order to replace the license plate holder of the TM Racing 300, you will need to loosen the screws that secure the old component to its housing: t…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos