Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Water Pump on the GasGas TXT 125?

Model: Gasgas Txt 125
Part: Pump

Video tutorial

To replace the water pump on the GasGas TXT 125, locate the pump on the right side of the bike, next to the clutch cover. To remove the water pump, disconnect the hoses and the mounting bolts so that it can be taken out of its housing.

Once removed, insert a new pump, connect it to the hoses, and secure it with the bolts, ensuring everything functions correctly.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

Txt 125 To replace the water pump on a GasGas TXT 125, locate the pump cover on the right side of the bike. Disconnect it from the appropriate hoses by loose…
Txt 125 You can replace the exhaust on the GasGas TXT 125 by loosening the screws that secure the exhaust end can to the appropriate supports: these are loca…
Txt 125 To replace the exhaust on the GasGas TXT 125, loosen the screws that secure it to the corresponding supports located on the side of the bike: the scr…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos