Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a Moto Guzzi Nevada 750?

Model: Moto Guzzi Nevada 750
Part: Air filter

Video tutorial

In this tutorial, you will see how to replace the air filter in a Moto Guzzi Nevada 750, a very simple and quick operation. First, wait for the engine to be completely cold, then remove the seat, disassemble the chrome air intake, and subsequently the panel located under the tank.

Repeat the operation on the opposite side, disconnect both the fuel hoses and the pump connector, and remove the tank itself. At this point, you can move all the cables above the airbox, open it, and remove the old filter.

To install the replacement and reassemble everything, simply follow the reverse procedure.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

How do you replace the air filter of the Moto Guzzi Nevada 750?
How do you replace the air filter of the Moto Guzzi Nevada 750?
Nevada 750 In order to replace the air filter of the Moto Guzzi Nevada 750, you need to loosen the screws that secure the fuel tank to its housing at the front …
How to Change the Final Drive Oil of a Moto Guzzi Nevada 750?
How to Change the Final Drive Oil of a Moto Guzzi Nevada 750?
Nevada 750 To replace the final drive oil of your Moto Guzzi Nevada 750, first ensure that the engine is cold. Next, lift the bike onto a stand to make the job …
How to replace the final drive oil of the Moto Guzzi Nevada 750
How to replace the final drive oil of the Moto Guzzi Nevada 750
Nevada 750 Today we will see the main steps useful for replacing the transmission oil of the Moto Guzzi Nevada 750. First of all, we put the motorcycle on the c…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos