Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, we will guide you on how to dismantle and replace the headlamp bulb on a Harley Davidson Street Bob. First, place your motorcycle on a stand and start by removing the metal frame of the headlamp by unscrewing the fixing screw. Then, remove the optical unit and disconnect the electrical connector of the bulb, as shown in the video. At this point, remove and replace the headlamp bulb with the correct type that has the same fitting (in this case, H4). Finally, reassemble the optical unit and secure the metal frame!

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Harley Davidson Street Bob
How to Replace the Rear Light Bulb on a Harley Davidson Street Bob
Street Bob This guide shows you how to remove and replace the rear light bulb on a Harley Davidson Street Bob in simple steps. First, place your motorcycle on i…
How to replace the front headlight on the Harley-Davidson Street Bob?
How to replace the front headlight on the Harley-Davidson Street Bob?
Street Bob In this tutorial we can see how to replace the front headlight on the Harley-Davidson Street Bob, a very simple and quick operation. First of all, ma…
How to replace the rear headlight bulbs of the Harley Davidson Street Bob
How to replace the rear headlight bulbs of the Harley Davidson Street Bob
Street Bob Today's instructions will show us how to disassemble and replace the rear headlight bulbs of the Harley Davidson Street Bob motorcycle. First, we put…

How to replace the engine oil in the Kawasaki Versys 1000?

As we can see in this tutorial, replacing the motor oil in the Kawasaki Versys 1000 is an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then position a container under the motorcycle and, using a socket wrench, unscrew the drain plug. Wait for all the oil in the system to completely drain out, remove the lower front cover and unscrew the old filter. At this point, we can tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos