Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Harley Davidson Street Bob

Model: Harley Davidson Street Bob
Part: Tail light bulb

Video tutorial

This guide shows you how to remove and replace the rear light bulb on a Harley Davidson Street Bob in simple steps. First, place your motorcycle on its stand and move to the rear.

Then, pry the sides of the light unit to remove it, gaining access to the bulb, as shown in the video. At this point, remove and replace the small bulb with a new one of the correct type; insert it into the holder and check that the bulb functions correctly, finally reassembling the outer plastic light unit!


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on the Harley Davidson Street Bob
How to Replace the Rear Light Bulbs on the Harley Davidson Street Bob
Street Bob Today's instructions will show you how to dismantle and replace the rear light bulbs on the Harley Davidson Street Bob motorcycle. First, place the b…
How do you replace the muffler on the Harley Davidson Street Bob?
How do you replace the muffler on the Harley Davidson Street Bob?
Street Bob It will be possible to replace the exhaust of the Harley Davidson Street Bob by loosening the screws that secure the muffler to its housing, located …
How to Replace the Headlamp Bulb on a Harley Davidson Street Bob
How to Replace the Headlamp Bulb on a Harley Davidson Street Bob
Street Bob Today, we will guide you on how to dismantle and replace the headlamp bulb on a Harley Davidson Street Bob. First, place your motorcycle on a stand a…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos