Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil of a Triumph Tiger?

Model: Triumph Tiger 800 Xc
Part: Engine oil

Video tutorial

To replace the engine oil of a Triumph Tiger, start by placing the bike on a flat surface. Then, lift the bike using the centre stand.

Remove the oil filler cap to allow proper drainage of the used oil. Position a container under the drain plug and unscrew it using an appropriate spanner. Once all the old oil has drained, re-screw the drain plug.

Fill the engine with new oil up to the recommended level. Check the level and start the engine to distribute the new oil evenly.

Finally, check the level again and ensure it is correct.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to replace the engine oil in the Triumph Tiger 800?
How to replace the engine oil in the Triumph Tiger 800?
Tiger 800 Xc In this tutorial we can see how to replace the engine oil in the Triumph Tiger 800, an extremely simple and quick operation. First of all, we wait fo…
How to Replace the Engine Oil and Oil Filter on a Triumph Tiger 800
Tiger 800 Xc To ensure the longevity of your engine, it is necessary to regularly perform routine maintenance; here’s how to replace the engine oil and oil filter…
How to Change the Engine Oil in a Triumph Tiger 800?
How to Change the Engine Oil in a Triumph Tiger 800?
Tiger 800 Xc This tutorial shows how to change the engine oil in a Triumph Tiger 800, a very simple and quick operation. First, wait for the engine to cool down s…

How to Set the Time on a Kymco DTX360?

To set the time on a Kymco DTX360, follow these steps. First, turn on the scooter and ensure it is in time display mode on the dashboard. Once you find this mode, press and hold the button for setting the time, located on the scooter's handlebars. After a few seconds, the display will start to flash, indicating that you can now adjust the time. Use the adjustment buttons to increase or decrease the hour until you reach the desired time. When you have set the correct time, press the time setting button again to confirm your selection. The display will stop flashing and the time will be set correctly. Be sure to consult the owner's manual for specific instructions for your Kymco DTX360 model, as the procedure may vary slightly.

Watch the video!


by ScegliAuto

More videos